AXLE
- Preform for further smooth finishing
- Maximum diameter 18 mm
- Length 147 mm
- Material steel 45
- Dimensional accuracy according to h12
- Earlier was manufactured by means of turning on automatic lathe
| ROTOR
- Preform for further turning
- Maximum diameter 48 mm
- Length 252 mm
- Material steel 20
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
|
SHAFT
- Further surface treatment is not required
- Maximum diameter 18 mm
- Length 62 mm
- Material steel 45
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
| AXLE
- Preform for further smooth finishing
- Maximum diameter 18 mm
- Length 135 mm
- Material steel 45
- Dimensional accuracy according to h12
- Earlier was manufactured by means of turning on automatic lathe
|
ROTOR
- Preform for further turning
- Maximum diameter 40 mm
- Length 215 mm
- Material steel 20
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of forging
| SHAFT
- Further surface treatment is not required
- Maximum diameter 16,4 mm
- Length 133 mm
- Material steel 45
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
|
PINION SHAFT
- Preform for further turning
- Maximum diameter 40 mm
- Length 60 mm
- Material steel 18XGT
- The method of coupling of two items with their posterior separation is applied during wedge rolling
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of forging
| SHAFT
- Further surface treatment is not required
- Maximum diameter 11,6 mm
- Length 88,9 mm
- Material steel 45
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
|
AXLE
- Preform for further smooth finishing
- Maximum diameter 21 mm
- Length 142 mm
- Material steel 45
- Dimensional accuracy according to h12
- Earlier was manufactured by means of turning on automatic lathe
| SHAFT
- Further surface treatment is not required
- Maximum diameter 21 mm
- Length 71 mm
- Material steel 35
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
|
AXLE
- Preform for further smooth finishing
- Maximum diameter 10 mm
- Length 120 mm
- Material steel 40X
- Dimensional accuracy according to h9 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
| SHAFT
- Preform for further turning
- Maximum diameter 16 mm
- Length 25 mm
- Material steel 20
- The method of coupling of two items with their posterior separation is applied during wedge rolling
- Dimensional accuracy according to h9 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
|
AXLE
- Preform for further smooth finishing
- Maximum diameter 16 mm
- Length 135 mm
- Material steel 40X
- Dimensional accuracy according to h9 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
| AXLE
- Preform for further smooth finishing
- Maximum diameter 10 mm
- Length 155 mm
- Material steel 40X
- Dimensional accuracy according to h9 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
|
CARRIER AXLE
- Preform for further smooth finishing
- Maximum diameter 19 mm
- Length 142 mm
- Material steel 45
- Dimensional accuracy according to h9 and IT12/2
- Earlier was manufactured by means of turning on automatic lathe
| PREFORM FOR FURTHER FORGING
- Maximum diameter 38 mm
- Length 88 mm
- Material steel 18XGT
- Dimensional accuracy according to h12 and IT12/2
- Earlier was manufactured by means of forging
|
PREFORM FOR FURTHER FORGING
- Maximum diameter 38 mm
- Length 193 mm
- Material steel 40?Dimensional accuracy according to h12 and IT12/2
| PREFORM FOR FURTHER FORGING
- Maximum diameter 40 mm
- Length 360 mm
- Material steel 18XGT
- Dimensional accuracy according to h12 and IT12/2
|
